DCP-T420W
 |
FAQs & Troubleshooting |
DCP-T420W
Date: 02/06/2020 ID: faq00100029_026
Enable the Brother machine's network interface.
Follow the steps below to enable the Brother machine's network interface.
-
Press WiFi Button/LED and
(Stop) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts blinking. -
Press Black (Mono) Start to enable Wi-Fi.
- When Wi-Fi is enabled, the Power LED blinks once, and then the Power LED and WiFi Button/LED are lit.
- When Wi-Fi is disabled, the Power LED blinks twice, and then the Power LED is lit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.