HL-1211W
FAQs & Troubleshooting |
HL-1211W
Date: 13/03/2013 ID: faq00000366_027
Out of Memory
The Out of Memory message appears when the machine memory is full and the machine cannot print full pages of a document. When the Out of Memory message appears, the following LED indications is shown on the control panel. The Error LED () will blink 4 times and turn off for 1 second.
Please follow the steps below to clear the Out of Memory message.
-
Press and hold for about 2 seconds until all the LEDs light up and then release it. The machine will cancel the print job and clear it from the memory.
The machine also cancels the print job and clears it from the memory automatically one minute after entering the Out of Memory state.
- Reduce the complexity of your document or lower the print quality.
HL-1110, HL-1201, HL-1211W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.