PJ-823
GYIK és hibaelhárítás |
PJ-823
Dátum: 28/11/2023 Azonosító: faqp00010652_004
How can I stop the printer from automatically feeding roll paper after printing? (for Mac)
Follow the steps below:
-
Make sure that the printer driver is installed.
If you have not installed the printer driver, visit the [Downloads] page to download the printer driver. Double-click the downloaded file, and then follow the on-screen instructions.
-
Open a document that you want to print, and then select [Print] from the [File] menu.
-
Confirm that your printer is selected for [Printer] and the specified paper size and type match the paper that is loaded.
-
In the [Printer Features] menu, select [No Feed/Feed Margin] for [Form Feed Mode].
-
Set [Feed Margin] as needed.
After the last page of the print job is printed, the paper is fed by the specified amount.If [Feed Margin] is set to 0, paper is not fed at the end of a job. If a value is entered for [Feed Margin], paper is fed at the end of the job in the amount of that value. Use this setting when printing on non-perforated roll paper.
- Click [Print].
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.