TJ-4420TN
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/lptj4420tneuk.jpg)
TJ-4420TN
Dátum: 28/09/2020 Azonosító: faqp00001455_007
How to clean the Platen Roller
Clean the Platen Roller as follows when replacing the label roll with a new one.
- Turn off the printer.
-
Open the Media Cover.
-
Push the Print Head Release Lever to open the Print Head.
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
-
Close the Print Head by pushing down on both sides and make sure it locks into place.
-
Close the Media Cover.
Calibrate the Gap/Black Mark Sensor every time you change the media.
Kapcsolódó GYIK-ek
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.