RJ-3055WB
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/rj3055wbeuk.jpg)
RJ-3055WB
Dátum: 11/05/2020 Azonosító: faqp00001448_009
The print quality is poor.
Check the following:
Is the media loaded correctly?
- Make sure that both sides of the Media Compartment Cover are fully closed.
- Install the correct media.
Are dust or adhesive accumulated on the Print Head or Platen Roller?
Clean the Print Head and Platen Roller. For details, see the FAQ: "How to clean the Print Head" or "How to clean the Platen Roller".
Is the print density set correctly?
Adjust the print density and print speed.
Run the printer self-test and check the Print Head test pattern for missing dots. For details, see the FAQ: "How to execute the printer configuration (Self-test) to debug".
If the problem still occurs, contact your reseller or Brother Customer Service for assistance.
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.