Innov-is M280D
GYIK és hibaelhárítás |
Innov-is M280D
Dátum: 09/08/2018 Azonosító: faqh00101085_000
A broken needle has fallen into the machine.
Turn off the machine, and then remove the needle plate.
-
If the needle that fell into the machine can be seen, use tweezers to remove it.
After removing the needle, return the needle plate to its original position.
Before turning on the machine, slowly turn the handwheel toward you to check that it turns smoothly.
Refer to Fabric is caught in the machine and cannot be removed.
- If the handwheel does not turn smoothly or the needle that fell into the machine cannot be removed, consult your authorized Brother dealer.
Kapcsolódó GYIK-ek
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.