ADS-1700W
GYIK és hibaelhárítás |
ADS-1700W
Dátum: 13/03/2023 Azonosító: faq00100526_500
Clean the Sensors
- Turn off and unplug the machine from the electrical socket.
- Open the Top Cover (1) and the Front Cover (2).
- Wipe off the paper dust accumulated on the Document Scanning Position Sensor (1) with a soft lint-free cloth moistened with water.
- Wipe off the paper dust accumulated on the Card Sensor (1) with a soft lint-free cloth moistened with water.
- Close the Front Cover and the Top Cover.
ADS-1200, ADS-1700W
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.