GYIK és hibaelhárítás

Bezárás

MFC-L2710DW

GYIK és hibaelhárítás

GYIK és hibaelhárítás

MFC-L2710DW

Nem az Ön terméke?

Dátum: 31/01/2022 Azonosító: faq00100511_500

Combine Address Book Numbers

Sometimes you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of long-distance carriers and credit card numbers as Address Book numbers.

You can store these long dialling sequences by dividing them and setting them up as separate Address Book numbers in any combination. You can even include manual dialling using the dial pad.

For example: You might have stored '01632' and '960555' in your machine as shown in the following table.

Applicable Models

'01632' stored in

'960555' stored in

MFC-L2710DN/MFC-L2710DW

Quick Dial: 003

Quick Dial: 002

MFC-L2730DW/MFC-L2750DW

Address Book: Brother 1

Address Book: Brother 2

You can use them both to dial '01632-960555' by using the following procedure.

MFC-L2710DN/MFC-L2710DW

  1. Press (FAX).
  2. Press twice, 003.
  3. Press OK.
  4. Press twice, 002.
  5. Press OK.
  6. Press Start.
    The machine will dial '01632-960555'.

To temporarily change a number, you can substitute part of the number by pressing it using the dial pad. For example, to change the number to '01632-960556', you could enter the number (01632) using Quick Dial 003, and then press 960556 using the dial pad.

If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing Redial/Pause.

MFC-L2730DW/MFC-L2750DW

  1. Press [(Fax)]>[Address Book].
  2. Press or to display the number of Brother 1.
  3. Press the number.
  4. Press [Apply].
  5. Press [Options].
  6. Press or to display the [Address Book] option, and then press it.
  7. Press or to display the number of Brother 2.
  8. Press the number.
  9. Press [Apply].
  10. Press [Fax Start].
    The machine will dial '01632-960555'.

To temporarily change a number, you can substitute part of the number by pressing it using the LCD. For example, to change the number to '01632-960556', you could enter the number (Brother 1: 01632) using Address Book, press [Apply], and then press 960556 using the LCD.

If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing [Pause].

Kapcsolódó modellek

MFC-L2710DN, MFC-L2710DW, MFC-L2712DN, MFC-L2712DW, MFC-L2730DW, MFC-L2732DW, MFC-L2752DW

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.

Küldés