MFC-B7715DW
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/mfcb7715dw_eu_as.jpg)
MFC-B7715DW
Dátum: 17/10/2018 Azonosító: faq00100293_000
Scan to an Editable Text File (OCR) Using ControlCenter4 Home Mode (Windows)
Your machine can convert characters in a scanned document to text using optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application.
NOTE: Illustrations shown below are from a representative product and operating system and may differ from your Brother machine and operating system.
- Load your document.
-
Click the
(ControlCenter4) icon in the task tray, and then click Open.
-
Click the Scan tab.
- Choose the Document Type.
- Change the document's Scan Size, if needed.
-
Click
(Scan).
The machine starts scanning, and the scanned image appears in the image viewer. - Click the left or right arrow buttons to preview each scanned page.
- Crop the scanned image, if needed.
-
Click
(OCR).
- The OCR dialog will appear. Configure the OCR settings, and click OK. The application you have chosen will open and display the converted text data.
Kapcsolódó GYIK-ek
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.