MFC-L2730DW
GYIK és hibaelhárítás |
MFC-L2730DW
Dátum: 31/01/2022 Azonosító: faq00100216_514
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is connected to a network or a telephone line , or has secure print data in the memory(Available only for certain models).
- To start printing, press on the control panel and then send a print job.
DCP-L2510D/DCP-L2530DW/DCP-L2537DW/DCP-L2550DN/MFC-L2710DN/MFC-L2710DW
- Press Menu.
- Press or to display the [General Setup] option, and then press OK.
- Press or to display the [Ecology] option, and then press OK.
- Press or to display the [Auto Power Off] option, and then press OK.
- Press or to display the [8hours], [4hours], [2hours], [1hour], or [Off] option, and then press OK.
- Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW
- Press .
- Press or to display the [Off], [1hour], [2hours], [4hours] or [8hours] option, and then press the option you want.
- Press .
DCP-L2510D, DCP-L2512D, DCP-L2532DW, DCP-L2550DN, DCP-L2552DN, MFC-L2710DN, MFC-L2710DW, MFC-L2712DN, MFC-L2712DW, MFC-L2730DW, MFC-L2732DW, MFC-L2752DW
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.