DCP-7070DW
 |
GYIK és hibaelhárítás |
DCP-7070DW
Dátum: 11/05/2020 Azonosító: faq00100029_004
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface (wired LAN or wireless LAN).
A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.
- Press Menu.
- Press the Up or Down arrow key to select Network. Press OK.
- Press the Up or Down arrow key to select Wired LAN or WLAN. Press OK.
- Press the Up or Down arrow key to select Wired Enable or WLAN Enable. Press OK.
- Press the Up or Down arrow key to select On or Off.
- Press OK.
- Press Stop/Exit or Cancel.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Kapcsolódó GYIK-ek
- I'm trying to install the driver with network settings, but I cannot locate a network connected Brother machine and complete the driver installation. (For Windows)
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot print using my Brother machine on a wired network. (Windows/macOS)
DCP-7070DW, DCP-B7520DW, MFC-9320CW, MFC-B7715DW, MFC-L2700DW, MFC-L2710DW, MFC-L2712DW
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.