MFC-J6510DW
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/mfcj6510dw_all.jpg)
MFC-J6510DW
Dátum: 12/04/2011 Azonosító: faq00002792_000
Loading paper in the manual feed slot.
You can load envelopes and special print media one at a time into the manual feed slot. Use the manual feed slot to print or copy on labels, envelopes, or thicker paper.
The machine automatically turns on Manual Feed Mode when you put paper in the manual feed slot.
- Open the manual feed slot cover.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Slide the paper guides to fit the paper.
Do not press the paper guides too tightly against the paper. Doing this may cause the paper to fold. - Using both hands, put one sheet of paper in the manual feed slot, with the side to be printed face up.
- Place the paper in the center of the manual feed slot between the paper guides. If the paper is not centered, pull it out and insert it again at the center position.
- Insert the page until the front edge touches the paper feed roller and the machine beeps.
- Let go of the paper when you feel the machine feed the paper in a short distance.
- The LCD will display Manual Feed Slot Ready.
- Place the paper in the center of the manual feed slot between the paper guides. If the paper is not centered, pull it out and insert it again at the center position.
- Do one of the following:
- If the data does not fit on one page, the LCD will prompt you to load another page. Repeat STEP 3.
- If the LCD does not prompt you to load another page, press the Black (Mono) Start or Color (Colour) Start key.
- Do not put additional paper in the manual feed slot until instructed to do so by the LCD. Doing this may cause a paper jam.
- Do not put more than one sheet of paper in the manual feed slot at any one time. Doing this may cause a paper jam.
- Do not put paper in the manual feed slot when you are printing from Tray #1 or Tray#2. Doing this may cause a paper jam.
- When you place thick paper—such as an envelope—in the manual feed slot, push it into the manual feed slot until you feel the machine feed it in a short distance.
- Make sure printing has finished before you close the manual feed slot.
- When paper is placed in the manual feed slot, the machine always prints from the manual feed slot.
- When you are faxing or printing a test page, paper set in the manual feed slot will be discharged before printing starts.
- When the machine is cleaning itself, the paper you set in the manual feed slot is discharged. Please set the paper again after the machine finishes cleaning.
- Do not put additional paper in the manual feed slot until instructed to do so by the LCD. Doing this may cause a paper jam.
- If the data does not fit on one page, the LCD will prompt you to load another page. Repeat STEP 3.
Kapcsolódó GYIK-ek
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.