NC-2100p
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/nc2100p_all.jpg)
NC-2100p
Dátum: 31/10/2006 Azonosító: faq00002384_000
Installing the Print Server.
- Turn off the printer power switch.
![](/g/b/img/faqend/faq00002384_000/eu_ot/en/7346/swtoff2.gif)
- Connect the NC-2100p to the parallel port located on the back of the printer.
![](/g/b/img/faqend/faq00002384_000/eu_ot/en/7347/cnt2.gif)
- Connect the Power cord from AC adapter to the NC-2100p.
![](/g/b/img/faqend/faq00002384_000/eu_ot/en/7348/cntpwcd_1.gif)
- Connect the network interface cable to NC-2100p, and then connect it to a free port on your hub.
![](/g/b/img/faqend/faq00002384_000/eu_ot/en/7349/cntifcbl2.gif)
- Plug the AC Adapter into an AC outlet, and then turn the printer power switch on.
![](/g/b/img/faqend/faq00002384_000/eu_ot/en/7350/swton2.gif)
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.