HL-2130
GYIK és hibaelhárítás |
HL-2130
Dátum: 25/04/2013 Azonosító: faq00000703_003
DRUM ERROR
When the DRUM ERROR message appears, the following LED indications is shown on the control panel. The Drum and Error LEDs are flashing.
Please follow the steps below to solve the problem:
- The drum unit needs to be cleaned. Please refer to the instructions, "Clean the corona wire of the drum unit.".
- If your LEDs still show the same error indication after you have cleaned the corona wire, replace the drum unit with a new one. Please refer to the instructions, "REPLACE DRUM".
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.