MFC-8950DW
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/mfc8950dw_all_2.jpg)
MFC-8950DW
Dátum: 08/05/2012 Azonosító: faq00000312_028
Toner specks
Please check the following points to solve the problem:
- Make sure that you use paper that meets our specifications. Rough-surfaced paper may cause the problem.
Please refer to the FAQs "What kind of paper can I use?" and "What is the recommended paper?"
- Clean the corona wire and the drum unit.
Please refer to the FAQs "Clean the corona wire." and "Clean the drum unit."
- The drum unit may be damaged.
Put in a new drum unit. Please refer to the FAQ "REPLACE DRUM".
- The fuser unit may be contaminated. Please contact Brother Customer Service from "Contact Us"
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.