GYIK és hibaelhárítás

Bezárás

A modell megszűnt. Ez az oldal már nem frissül újra.

HL-2460

GYIK és hibaelhárítás

GYIK és hibaelhárítás

Dátum: 27/01/2014 Azonosító: faq00000307_003

JAM TRAY (Inside the Paper Tray)

JAM TRAYXXX
.

 

**xxxx indicates the tray number that contains jammed paper.

 

 

Note: The LCD names for the paper trays are as follows.

 Tray type  Tray name
 Upper paper tray  TRAY1
 Optional Lower tray  TRAY2 or TRAY3 or TRAY4

 

If a paper jam occurs inside the paper tray, follow these steps:

 

  1. Pull the paper tray completely out of the printer.

  2. Use both hands to slowly pull out the jammed paper.

    When you cannot remove a small piece of jammed paper, it is easy to remove it by turning the dial to the lower position, as shown below.

    If a paper jam occurs when using A6 size paper, remove the jammed paper, turn over the stack of the paper in the paper cassette, and print it again.

  3. Put paper below the maximum paper mark. Make sure that the paper guide release lever is set to the paper size in the paper cassette.
  4. Put the paper tray firmly back in the printer.

     

    DO NOT take out the upper paper tray while paper is feeding from a lower paper tray because this may cause a paper jam.

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.