MFC-590
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/mfc590_eu.jpg)
MFC-590
Dátum: 24/08/2006 Azonosító: faq00000261_013
How do I clean the Scanner to improve the copy or fax quality?
To clean the Document Scanner, follow the steps listed below:
-
Unplug the telephone line and then the power cord.
When you reconnect these lines later, connect the power cord first, then the telephone line. - Lift the Document Cover. Clean the scanner glass of the flat bed scanner with isopropyl alcohol on a lint free cloth.
-
Clean the white bar under the ADF (automatic document feeder) and the glass strip located below with isopropyl alcohol on a lint free cloth.
![](/g/b/img/faqend/faq00000261_013/eu_ot/en/92200/MFC5100C-035.jpg)
Do not use isopropyl alcohol to remove dirt from the control panel. It may cause a crack on the panel.
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.