HL-2700CN
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/hl2700cn_all.jpg)
HL-2700CN
Dátum: 27/01/2014 Azonosító: faq00000164_001
"JAM E" error appears on the LCD. What should I do?
If there is a paper jam in the upper part of the duplex unit, follow these steps:
-
Open the duplex back cover.
-
Open the duplex inside unit.
-
If the paper is caught in the lower exit of the duplex unit, remove the jammed paper by pulling it out slowly.
-
If the jammed paper is at the upper exit of the duplex unit, remove it by rotating the green pinch roller downwards to feed the paper out through the exit of the unit.
-
Close the duplex inside unit and the duplex back cover.
Kapcsolódó GYIK-ek
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.