HL-1670N
![]() |
GYIK és hibaelhárítás |
![](/g/b/img/product/hl1670n_all.jpg)
HL-1670N
Dátum: 26/04/2013 Azonosító: faq00000006_015
Vertical black lines appear on the printout.
![](/g/b/img/faqend/faq00000006_015/eu_ot/en/90024/Black_lines.gif)
Please check the following points:
-
Clean the primary corona wire of the drum unit. To see how to clean the corona wire of the drum unit, click here.
-
Make sure the primary corona wire cleaner is at the home position.
- The toner cartridge may be damaged. Put in a new toner cartridge. To see how to replace the toner cartridge, click here.
- Make sure that a torn piece of paper is not inside the printer covering the scanner window.
- The fixing unit may be damaged. Click here to go to "Contact us" page.
Kapcsolódó GYIK-ek
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?
2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?
Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.