FAQs & Troubleshooting

Close

HL-3070CW

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-3070CW

Not your product?

Date: 22.07.2009 ID: faq00000292_024

What kind of memory can I use?

The printer has 64 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 576 MB by installing a Dual In-line Memory Module (SO-DIMM).

In general, the machine uses industry-standard SO-DIMM with the following specifications:

  • Type: 144 pin and 64 bit output
  • CAS Latency: 2
  • Clock frequency: 100 MHz or more
  • Capacity: 64, 128, 256 or 512 MB
  • Height: 31.75 mm (1.25 in.)
  • SDRAM can be used.

  • There might be some SO-DIMMs that will not work with the printer.
  • For more information, call the dealer you bought the printer from or contact Brother Customer Service from "Contact Us".

This type of memory SO-DIMM is available from most major memory suppliers.

    Related FAQs

    Related Models

    HL-3070CW, HL-4040CN, HL-4050CDN

    If you need further assistance, please contact Brother customer service:

    Content Feedback

    To help us improve our support, please provide your feedback below.
    Step 1: How does the information on this page help you?
    Step 2: €Are there any comments you would like to add?

    Please note this form is used for feedback only.