FAX-878
 |
FAQs & Troubleshooting |
FAX-878
Date: 01.10.2008 ID: faq00000541_003
How to clear "PRINTHEAD OVERHEATED WAIT TO COOL" Error?
This error would occur if the printhead on the FAX overheated when printing large quantities of pages or pages with excessive dark backgrounds.
To clear the message, unplug the power cord for approimately 30 minutes to allow the FAX to cool down. After approximatley 30 minutes, plug the power cord in and print the help list to test.
To clear the message, unplug the power cord for approimately 30 minutes to allow the FAX to cool down. After approximatley 30 minutes, plug the power cord in and print the help list to test.
To print the help list:
-
Make sure that there is no document in the ADF.
-
Press the Copy/Reports, then press 2.
FAX-878
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.