Innov-is A80
FAQs & Troubleshooting |
Innov-is A80
Date: 23.04.2020 ID: faqh00101510_001
Outline of viewing the LCD Screen
LCD Operation
When the machine is turned on, the LCD will light up and the following screen is displayed.
To change the displayed settings, use the operation keys and stitch pattern selection dial.
No. | Display | Item Name | Explanation | ||||||||||||
(1) | Presser foot |
Shows the symbol for the presser foot to be used. Before sewing, attach one of the presser feet shown here.
* The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the screen. |
|||||||||||||
(2) | – | Stitch number | Shows the number of the currently selected stitch pattern. | ||||||||||||
(3) | Needle position setting |
Shows whether the needle is in the programmed raised or lowered position. In addition, shows whether the single needle mode or twin needle mode is selected.
|
|||||||||||||
(4) | Stitch length |
Shows the stitch length of the currently selected stitch pattern. When is displayed around , the stitch length is set to the default value. |
|||||||||||||
(5) | Stitch width |
Shows the stitch width of the currently selected stitch pattern. When is displayed around , the stitch width is set to the default value. |
|||||||||||||
(6) | Automatic reverse/ reinforcement stitching |
Shows that the automatic reverse/reinforcement stitching is currently turned on. | |||||||||||||
Innov-is A80
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.