Innov-is XJ1
![]() |
常見問題&故障排除 |
![](/g/b/img/product/hf_inovxj1eas.jpg)
Innov-is XJ1
日期:26.09.2018 ID:faqh00101083_000
Stitch pattern does not turn out
-
Wrong presser foot was used.
Attach the correct presser foot.
-
Did not use a stabilizer material on thin fabrics or stretch fabrics.
Attach a stabilizer material.
Refer to Tips for sewing thin fabrics , For better results when sewing stretch fabrics.
-
Thread tension is set incorrectly.
Adjust the thread tension.
Refer to How to adjust the thread tension , Incorrect thread tension.
-
Fabric was pulled, pushed or fed at an angle while it was being sewn.
Sew while guiding the fabric with your hands so that the fabric is fed in a straight line.
-
The thread is tangled, for example, in the bobbin case.
Remove the tangle thread. If the thread is tangled in the bobbin case, clean the race.
Refer to How do I clean the race?
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質