FAQs & Troubleshooting

Close

Innov-is 750E

FAQs & Troubleshooting

FAQs & Troubleshooting

Innov-is 750E

Not your product?

Date: 14.05.2015 ID: faqh00000021_000

Why is the outline sewing off the pattern?

This happens mainly when the fabric is not set to the embroidery frame correctly or the upper thread is too tight.

 

 

  • Improper backing material (stabilizer) is put on the fabric. 
    Thick stabilizer has to be used for elastic or thin fabric.

One Point Advice   Fabrics and stabilizer material for embroidery 

  • The fabric has to be set to the frame tight enough.

One Point Advice   Embroidery 

  • Decrease the upper thread tension manually to the basic thread tension setting or less.
 

Related FAQs

Related Models

Innov-is 1000, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 4000D/4000, Innov-is 700E, Innov-is 750D, Innov-is 750E, Innov-is 900, Innov-is 950, Innov-is 980D, Innov-is 980K, Innov-is 985D, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V3, Innov-is V7

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.