ADS-3600W
 |
常見問題&故障排除 |
ADS-3600W
日期:14.05.2019 ID:faq00100465_001
Your Scanner Cannot Be Detected on the Network During Installation
| Cause | Action | Interface |
| Your computer is not connected to the network. | Make sure your computer is connected to a network, for example, a LAN environment or Internet services. For further support, contact your network administrator. | Wired/Wireless |
| Your machine is not connected to the network. |
(Wired network)
(Wireless network) |
Wired/Wireless |
| You use security software. |
|
Wired/Wireless |
| You use a Wi-Fi router. | The privacy separator on your Wi-Fi router may be enabled. Disable the privacy separator. | Wireless |
| Your Brother machine is placed too far from the Wireless access point/router. | Place your Brother machine within about 3.3 feet (1 meter) of the Wireless access point/router when you configure the wireless network settings. | Wireless |
| There are some obstructions (walls or furniture, for example) between your machine and the Wireless access point/router. | Move your Brother machine to an obstruction-free area, or closer to the Wireless access point/router. | Wireless |
| There is a wireless computer, Bluetooth-supported device, microwave oven, or digital cordless phone near the Brother machine or the Wireless access point/router. | Move all the devices away from the Brother machine or Wireless access point/router. | Wireless |
(Settings) > Network > Wired LAN > Wired Status > Status. If the LCD displays Inactive or Wired OFF, ask your network administrator whether your IP address is valid or not.
(Settings) > Network > WLAN > WLAN Status > Status. If the LCD displays Connection Failed, ask your network administrator whether your IP address is valid or not.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質