MFC-J2340DW
 |
常見問題&故障排除 |
MFC-J2340DW
日期:28.06.2022 ID:faq00100347_510
Load Documents in the Automatic Document Feeder (ADF)
The ADF can hold multiple pages and feeds each sheet individually.
Use paper that is within the sizes and weights shown in the table. Always fan the pages before placing them in the ADF.
Document Sizes and Weights
| Length: *1 | 148 to 355.6 mm |
| Width: | 105 to 215.9 mm |
| Paper Weight: | 64 to 120 gsm |
*1
Up to 900 mm when using the long paper function.
- IMPORTANT
-
- DO NOT pull on the document while it is feeding.
- DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
- DO NOT use cardboard, newspaper or fabric.
- Make sure documents with correction fluid or written in ink are completely dry.
(MFC-J2740DW/MFC-J5740DW/MFC-J5955DW)
Your 2-sided documents can be copied up to A4 size, and can be faxed or scanned up to Legal size using the ADF.
- Fan the pages well.
- Adjust the paper guides (1) to fit the document size.
- Place your document face up in the ADF, as shown in the illustration, until you feel the document touch the feed stoppers and the machine beeps.
If you loaded a small size document and cannot remove it, lift the ADF document support (1), and then remove the document.
- IMPORTANT
- DO NOT leave any documents on the scanner glass. If you do this, the ADF may jam.
MFC-J2340DW, MFC-J2740DW
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質