FAQs & Troubleshooting

Close

DCP-T426W

FAQs & Troubleshooting

FAQs & Troubleshooting

DCP-T426W

Not your product?

Date: 01.03.2024 ID: faq00003017_512

Copy an ID Card

Use the 2 in 1 ID feature to copy both sides of an identification card onto one page, keeping the original card size.
image
  • Make sure the paper size is set to A4 or Letter.
  • You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
  1. Place your identification card face down near the lower-right corner of the scanner glass as shown.
    image
  2. Press Copy Shortcut.
    The machine starts scanning one side of the identification card.
  3. After the machine has scanned the first side, the Power LED blinks slowly. Turn over the identification card and press Copy Shortcut to scan the other side.
image
You can change the Copy Shortcut button settings using Web Based Management.

Related Models

DCP-T420W, DCP-T426W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.