MFC-T810W
 |
常見問題&故障排除 |
MFC-T810W
日期:26.04.2018 ID:faq00003017_507
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
Make sure the paper size is set to A4 or Letter.
- You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- Scannable area
- (MFC-T810W) Press
(COPY). - Enter the number of copies in one of the following ways:
- (DCP-T510W/DCP-T710W) Press
or 
on the control panel. - (MFC-T810W) Enter the number of copies using the dial pad.
- (DCP-T310) Press Number of Copies repeatedly.
- Press Options or Copy / Scan Options and or to select [Layout(2in1 ID)]. Press OK.
- Press or to select [2in1(ID)]. Press OK.
- Press Mono Start or Colour Start.The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press Mono Start or Colour Start to scan the other side.
MFC-T910DW
- Place your identification card face down near the upper-left corner of the scanner glass.
- 3 mm or greater (top, left)
- 207 mm
- 145 mm
- Scannable area
- Press (COPY).
- Enter the number of copies using the dial pad.
- Press or to select the following:
- Select [Page Layout]. Press OK.
- Select [2in1(ID)]. Press OK.
- Press Mono Start or Colour Start.The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press
to scan the other side.
DCP-T510W, DCP-T710W, MFC-T810W, MFC-T910DW
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質