Click here if you know how to send a fax but are having issues sending, click here to see information for it.
 

Step 1: Verify you hear the dial tone

1. To verify your Brother machine has a dial tone. (Click here to see how to verify that my Brother machine has a dial tone.)

    

   • If there is dial tone, go to STEP 2.
   • If there is no dial tone, verify the telephone line cord is directly connected from the Brother machine's LINE jack (socket) to the wall telephone jack (socket).

      

     • If you are using an analog telephone line and there are splitters, commshare devices, power strips or surge protectors between the wall telephone jack (socket) and the Brother machine, remove them. Removing these devices assists in determining if the issue is related to the device or the Brother machine.
     • If you are using a DSL or Voice Over Internet Protocol (VoIP) telephone system, there can be multiple types of telephone line connections (modems, interface boxes, phone adapters, splitters, etc). However, a telephone line must be connected to the Brother machine's LINE jack (socket).

    

2. If there is still no dial tone, click here to see information for it.

Step 2: Send a fax following one of these fax-sending procedures

• Send a fax using your Brother machine's Automatic Document Feeder (ADF)
• Send a fax using your Brother machine's flat scanner glass

Send a fax using your Brother machine's Automatic Document Feeder (ADF)

For the models with an ADF (Automatic Document Feeder):

1. Place the document(s) you want to fax in the ADF.
   After you put your document(s) in the ADF, the Brother machine's display (hereinafter called LCD) should display "ADF Ready" for a few seconds and then display the fax-sending options.
    
2. Press (FAX).
3. Enter the fax number you want to send to.
   You can manually dial the number or use the Outgoing call history or Caller ID history or Address Book.
4. Press Black (Mono) Start.
   Your Brother machine will scan and fax the document.

Send a fax using your Brother machine's flat scanner glass

1. Place the document you want to fax face down on the flat scanner glass.
2. Press (FAX).
3. Enter the fax number you want to send to.
   You can manually dial the number or use the Outgoing call history or Caller ID history or Address Book.
4. Press Black (Mono) Start.
   The machine starts scanning the first page.
5. Do one of the following:

    

   • To send a single-page fax, press the Left arrow key or Black (Mono) Start again.
     The machine starts sending the document.
   • To send more than one page, press the Right arrow key. Go to STEP 6.

    

6. Place the next page you want to fax face down on the flat scanner glass.
7. Press the Right arrow key.
   Your Brother machine will scan the next page.
   Repeat STEPS 5 through 7 for each additional page you want to fax.
8. After all pages have been scanned, press the Left arrow key or Black (Mono) Start again to start.