MFC-9970CDW
![]() |
常見問題&故障排除 |
![](/g/b/img/product/mfc9970cdw_all.jpg)
MFC-9970CDW
日期:09.11.2011 ID:faq00002647_000
When I send a fax from the machine, an error "not register." or "not registered." is displayed.
The "Fax to server" may be "ON" and this may cause the problem.
To solve the problem make sure that "Fax to server" is "OFF".
There are two ways to change the settings of "Fax to server": By using the control panel and by using the Web Based Management.
Please choose the appropriate way and use the following steps below.
Method1: using the control panel
- Press Menu.
- Select LAN or Network and Fax to Server.
- Select Off and then press OK.
- Press Stop/Exit.
Method2: using the Web Based Management
- Start your web browser.
- Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP address).
- For example: http://192.168.1.2/ - Click I-Fax Settings and Fax to Server.
- Select Off.
- Click Submit.
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質