MFC-9140CDN
![]() |
常見問題&故障排除 |
![](/g/b/img/product/mfc9140cdn_eu_as_cn.jpg)
MFC-9140CDN
日期:29.01.2013 ID:faq00000309_021
Jam Rear
If the machine's display shows the message Jam Rear, a paper jam occurred behind the back cover. Follow the steps below to clear the message Jam Rear.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
- Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
- Open the back cover.
- Pull the green tabs at the left and right sides toward you to release the fuser cover (1).
- Use both hands to gently pull the jammed paper out of the fuser unit.
- Close the fuser cover (1). Make sure the green tabs at the left and right sides lock into place.
- Close the back cover until it locks in the closed position.
如果您需要進一步的協助, 請聯絡Brother客戶服務:
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質