MFC-7450
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfc7450_as.jpg)
MFC-7450
Date: 26.06.2020 ID: faq00000110_018
How do I adjust my Brother machine's Sleep Mode setting?
Setting the Sleep Time reduces power consumption by turning off the fuser inside the Brother machine when the machine is idle. You can choose how long the Brother machine is idle before it goes into Sleep Mode. The Sleep Mode timer is automatically reset when the Brother machine receives PC data or makes a copy. The factory setting is 05 minutes.
While the Brother machine is in Sleep Mode, you will see "Sleep" on the LCD. If you try to print or copy in Sleep Mode, there will be a short delay while the fuser warms up to working temperature.
For Wireless Models
If you cannot print or scan wirelessly, make sure both your Brother machine and your wireless router/access point use the latest firmware.
-
To update the machine's firmware, download the Firmware Update Tool.
> Click here to download the Firmware Update Tool. - To update your wireless router/access point’s firmware, see the documentation provided with your wireless router/access point.
To adjust the Sleep Mode setting, follow these steps:
-
Press Menu and choose General Setup => Ecology => Sleep Time.
-
Do one of the following:
-
Use the keys on the dial pad enter the number of minutes the machine is idle before it enters Sleep Mode. You can enter 00 to 99.
-
To turn Sleep Mode off, follow these steps:
-
Press the START and OPTIONS keys simultaneously.
The LCD will read "Sleep Mode: On."
-
Press the UP OR DOWN ARROW key to choose Off.
- Go to STEP 3.
-
Press the START and OPTIONS keys simultaneously.
-
Use the keys on the dial pad enter the number of minutes the machine is idle before it enters Sleep Mode. You can enter 00 to 99.
-
Press the OK key.
- Press the STOP/EXIT key.
MFC-7340, MFC-7450, MFC-7840N
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.