HL-5150D
FAQs & Troubleshooting |
HL-5150D
Date: 24.08.2006 ID: faq00000098_002
What is the printable area per page?
When using PCL (standard driver) emulation, the edges of the paper that cannot be printed on are shown below.
Portrait
A4 | Letter | Legal | B5(ISO) | Executive | A5 | A6 | B6(ISO) | |
1 | 4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
2 | 6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
3 | 4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4 | 6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.35mm (0.25in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
6.01mm (0.24in.) |
When using BR-Script emulation, the edges of the paper that cannot be printed on are 4.32 mm (0.17 in.).
Landscape
A4 | Letter | Legal | B5(ISO) | Executive | A5 | A6 | B6(ISO) | |
1 | 4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
2 | 5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
3 | 4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4.2mm (0.17in.) |
4 | 5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.08mm (0.2in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
5.0mm (0.19in.) |
When using BR-Script emulation, the edges of the paper that cannot be printed on are 4.32 mm (0.17 in.).
HL-5140, HL-5150D, HL-5170DN, HL-6050D, HL-6050DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.