FAQs & Troubleshooting

Close

MFC-L6900DW(T)

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-L6900DW(T)

Not your product?

Date: 20/02/2019 ID: faq00100662_000

Print by Raspbian (Linux)

Printing

To print using a terminal

Open a terminal window.


Use the following command:
lpr -P BrGenPrintML2 print_file_name

 

To change the print settings, use the "-o" switch:
lpr -P BrGenPrintML2 -o PageSize=A5 -o Resolution=300dpi print_file_name

You can view the details of Parameter by the following command.

Command: brprintconf_{Model Name without "-"}

E.g. MFC-J430W : brprintconf_mfcj430w

 

To print from an application

Open the file you want to print.
In the application you are using, go to the print dialogue box.
In the print dialogue box, select "BrGenPrintML2" as the printer name.

If the print jobs are not printed successfully, make sure you have correctly configured the printer's IP address or node name using the lpadmin command.

 

Supported File Formats

We recommend using the lpr command only when printing the following formats: PDF, PS, TXT, and JPG. To print other file formats, print directly from the application supporting that file format.

Related Models

DCP-L2500D, DCP-L2520DW, DCP-L2540DN, DCP-L5500DN, DCP-L6600DW, HL-L2300D, HL-L2340DW, HL-L2360DN, HL-L2365DW, HL-L5000D, HL-L5050DN, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , HL-S7000DN, MFC-L2700DN, MFC-L2700DW, MFC-L2720DW, MFC-L2740DW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.