MFC-L6900DW(T)
 |
FAQs & Troubleshooting |
MFC-L6900DW(T)
Date: 15/06/2022 ID: faq00100217_001
Access Web Based Management
The default login password to manage machine settings is either:
-
the password located on the back or bottom of the machine preceded by "Pwd"
OR - initpass
We recommend you change it to protect your machine from unauthorised access.
- Start your web browser.
-
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
For example:
http://192.168.1.2-
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://[your node name]
The NetBIOS name can be found on the Network Configuration Report. - For Macintosh, access Web Based Management by clicking the machine's icon in the Status Monitor screen.
-
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
-
If the machine prompts you for a password, type it, and then click
.
If you have not previously set your own password, type the default login password above.
You can now change the print server settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the configuration.
Related FAQs
DCP-J1100DW, DCP-L3510CDW, DCP-L3550CDW, DCP-L5500DN, DCP-L6600DW, HL-J6000DW, HL-J6100DW, HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L5050DN, HL-L5100DN(T), HL-L5200DW(T), HL-L6250DN, HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , MFC-J1300DW, MFC-J5945DW, MFC-J6945DW, MFC-J6947DW, MFC-L3710CW, MFC-L3730CDN, MFC-L3750CDW, MFC-L3770CDW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.