MFC-J415W
 |
FAQs & Troubleshooting |
MFC-J415W
Date: 07/07/2009 ID: faq00000169_000
Why does my machine display "Awaiting Redial"?
There are several reasons this message would appear when sending a fax.
- If the fax number you are dialing does not answer, this message will appear. Verify you have the correct fax number and try again.
- Verify the telephone line cord is connected from the socket on the FAX/MFC labeled LINE directly to the WALL socket. Disconnect and reconnect to ensure the connection is secure and solid.
- Verify if your Brother machine has a dial tone. For more information, please refer to "How can I verify if my Brother machine has a dial tone?".
- If the receiving unit is busy, the sending unit will automatically redial the number within 5 minutes. The sending unit will attempt to redial up to three times at five minutes intervals. If the unit is still busy, the sending unit will display "No Response/ Busy" and print out a report with the same message.
Anytime you want to make a second call to the last number dialed, press Redial/Pause and then Start.
Related FAQs
FAX-1840C, FAX-1940CN, FAX-2440C, MFC-210C, MFC-215C, MFC-235C, MFC-240C, MFC-250C, MFC-260C, MFC-290C, MFC-297C, MFC-3240C, MFC-3340CN, MFC-3360C, MFC-410CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-490CW, MFC-5440CN, MFC-5460CN, MFC-5490CN, MFC-5840CN, MFC-5860CN, MFC-5890CN, MFC-5895CW, MFC-620CN, MFC-640CW, MFC-6490CW, MFC-660CN, MFC-680CN, MFC-6890CDW, MFC-790CW, MFC-820CW, MFC-845CW, MFC-885CW, MFC-9120CN, MFC-9320CW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9460CDN, MFC-9465CDN, MFC-9840CDW, MFC-990CW, MFC-9970CDW, MFC-J265W, MFC-J410, MFC-J415W, MFC-J430W, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.