HL-5170DN
 |
FAQs & Troubleshooting |
HL-5170DN
Date: 31/03/2006 ID: faq00000583_000
The printer makes a grinding or clicking sound.
The printer or the drum/toner unit may cause the grinding or clicking noise
-
Power off the printer and open the front cover.
-
Remove the drum/toner unit and close the front cover.
-
Power the printer back on.
If the grinding or clicking noise dose not occur when the drum/toner unit is removed from the printer, then the drum/toner unit is the cause of the noise. Install a brand new drum unit and/or toner cartridge to stop the noise.
If the grinding or clicking noise still occurs with the drum/toner unit removed then this indicates a problem with the printer. Please contact your dealer or Brother Customer Service.
HL-5030, HL-5040, HL-5050, HL-5070N, HL-5130, HL-5140, HL-5150D, HL-5170DN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.