HL-4200CN
FAQs & Troubleshooting |
HL-4200CN
Date: 21/11/2005 ID: faq00000051_000
Im trying to print but a "Feed Jam Check Tray" error appears on the LCD.
Follow the procedure below to clear the error:
Completely remove the paper tray from the printer.
Remove all the jammed and/or creased paper from the tray.
If there is jammed paper remaining inside the printer, pull it out carefully to avoid tearing it.
Push up button A (1) and fully open the front cover (2). Confirm that there are no scraps of paper remaining inside the printer.
Close the front cover.
Hold the paper tray with both hands, align it with the opening in the printer and gently push it back in the printer.
Push the paper tray completely back into the printer.
- If the Optional Tray Module is installed, look for the jammed paper sequentially, starting with the lowest tray. To see how to clear the jam, click here.
Do not use excessive force on the paper tray. Doing so could damage the paper tray or the inside of the printer.
HL-4000CN, HL-4200CN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.