Innov-is NV870SE
 |
FAQs & Troubleshooting |
Innov-is NV870SE
Date: 12/10/2007 ID: faqh00000009_000
Embroidery
- Problems that occur most in embroidery is misalignment of the pattern.
- This is caused mostly because a fabric is loose when it’s set in the embroidery frame.
- Make sure to set the fabric tightly into the embroidery frame so that you hear a drum-like sound if you tap the fabric lightly.
- Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
- Prepare a stabilizer material that is larger than the embroidery frame being used.
- Make sure to attach the correct surface of the stabilizer material to the fabric securely using an iron.
 |
 Fusible side of stabilizer Fabric(wrong side) |
- Use Brother embroidery threads and needle 75/11 for embroidery.
EV1, Innov-is 1200, Innov-is 1250, Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 97E, Innov-is F440E, Innov-is F480, Innov-is F540E, Innov-is F580, Innov-is I, Innov-is Ie, Innov-is M230E, Innov-is M240ED, Innov-is M280D, Innov-is M330E, Innov-is M340ED, Innov-is M380D, Innov-is NV2600, Innov-is NV2650D, Innov-is NV2700, Innov-is NV2750D, Innov-is NV800E, Innov-is NV870SE, Innov-is NV880E, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XJ2, Innov-is XP1, Innov-is XP3, Innov-is XV, PE-180D, PE-190D, PE-300S, PE-400D, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, PP1, SuperGalaxie 3000/3000C/3000D/3100D
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)