Innov-is 5000
 |
FAQs & Troubleshooting |
Innov-is 5000
Date: 27/08/2014 ID: faqh00100070_000
How to use the Multi-purpose Screwdriver.
Since the screwdriver can be changed to three different positions, it can be extremely useful for the various machine preparations.
Position “1”
You can install/remove the presser foot holder, needle clamp screw.
 |
 |
Position “2”
You can install/remove the needle plate.
Position “3”
The multi-purpose screwdriver can be positioned over the screw on the embroidery frame to tighten the screw after hooping the fabric or when removing the fabric.
When rotating the multi-purpose screwdriver, do not forcefully rotate it in the direction that it does not rotate; otherwise, it may break.
Innov-is 1500D/1500, Innov-is 2200, Innov-is 4000D/4000, Innov-is 5000, Innov-is I, Innov-is Ie, Innov-is NV2600, Innov-is NV800E, Innov-is NV870SE, Innov-is V3, Innov-is V3 LE, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is XE1, Innov-is XE2, Innov-is XJ1, Innov-is XV
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.
Please do not enter contact information or any other personal information here.
(We will not respond to any Feedback you send us.)