ADS-3000N
FAQs & Troubleshooting |
ADS-3000N
Date: 11/03/2019 ID: faq00000168_010
Service Call
If there is an error that you cannot clear yourself, the machine will indicate the need for a service call by lighting up all the LEDs as shown below.
If you see the service call indication shown above, turn the machine off and then on, and then try to scan again. If the error is not cleared after turning the machine off and on, press Stop. The LEDs will light up as shown in the table below to identify the error.
Error Code |
LED indications |
A7:Not a ROM of matching colour Parameter to CIS Maker | |
A8:Matching failure of colour parameter | |
Ex:Unregistered wireless MAC address | |
Ex:Unregistered wired MAC address | |
A9:Detected a special scanning error |
Make a note of the error code referring to the table above, and report the code to your dealer or Brother Customer Service from "Contact Us".
ADS-2400N, ADS-3000N
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.