Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has scanned. When the machine scans 50,000 times, a message will be displayed on the Status Monitor to remind you to replace the Pick-up Roller.

1. Open the Top Cover (1) and the Front Cover (2).
    
   

    

2. Pinch the Pick-up Roller Cover (1) and then pull the cover up.
    
   

    

3. Slide the Pick-up Roller (1) all the way to the right.
    
   

    

4. The holder of the Pick-up Roller has a narrow opening, and the shape of the shaft of the Pick-up Roller matches this opening. Rotate the Pick-up Roller until you can fit the shaft into the opening of the holder.
    
   

    

5. Pinch and pull the Pick-up Roller out of the machine.
    
   

    

6. Place a new Pick-up Roller into the machine.
    

   Identify the left and right sides of the Pick-up Roller before attaching it.

   

    

    

7. Slide the Pick-up Roller (1) to the left edge while turning the Pick-up Roller.
    
   

    

8. Close the Pick-up Roller Cover firmly.
    
9. Close the Front Cover and the Top Cover.
    
10. Reset the counter. Follow the steps below to reset the counter.

     

    1. Press  (Settings).
        
    2. Press the Up or Down arrow key to display Machine Info..
        
    3. Press Machine Info..
        
    4. Press Usage Counters.
        
    5. To reset the counter for the Pick-up Roller, press Pick-up Roller Count.
        
    6. The LCD shows the confirmation message. Press Yes.
        
    7. Press .