PT-D800W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/d800weuk.jpg)
PT-D800W
Date: 23/09/2020 ID: faqp00100525_000
When I use self-laminating tape, the text or objects on the label are printed incorrectly or are printed on its transparent part.
Follow the steps below:
- Download and install the latest version of the printer driver, firmware, and P-touch Editor from the [Downloads] section of this website.
- Make sure the printer is set up to use self-laminating tape using either P-touch Editor or the printer keyboard.
> When using P-touch Editor to edit and print labels
> When using the printer keyboard to edit and print labels (PT-E500/D800 series only)
When using P-touch Editor to edit and print labels
Use the Cable Labelling Wizard to select the self-laminating tape option:
- Start P-touch Editor.
-
Click [Cable Labelling Wizard].
You can also open the Cable Labelling Wizard from the layout window. Click the Cable Labelling icon (
).
<Express Mode> <Professional Mode> -
Select [Self-Laminating] from the Label Type drop-down list.
-
Specify the settings you want and click [OK].
-
Edit and print the label.
<Express Mode> <Professional Mode>
![](/g/b/img/faqend/faqp00100525_000/gb/en/2389352/back_to_top.gif)
When using the printer keyboard to edit and print labels (PT-E500/D800 series only)
- Install the self-laminating tape into the printer.
-
Press the [Cable Wrap] key.
The keyboard layout may differ depending on your model.
-
Make sure that the LCD displays [SELF-LAMINATING].
If the LCD displays [CABLE WRAP] instead of [SELF-LAMINATING], update your printer's firmware.
Download and install the latest firmware from the [Downloads] section, and then repeat this procedure again starting from step 1. - Specify the settings you want, and then click the [OK] or [Enter] key.
- Edit and print the label.
-
Install the self-laminating tape into the printer.
-
Select [Cable Label] using the cursor keys (
), and then press the [OK] or [Enter] key.
-
Select [Cable Wrap] using the cursor keys (
), and then press the [OK] or [Enter] key.
-
Make sure that the LCD displays [Self-Laminating].
If [Self-Laminating] does not appear on the LCD, update the printer's firmware.
Download and install the latest firmware from the [Downloads] section of this website, and then repeat this procedure again starting from step 1. -
Specify the settings you want, and then press the [OK] or [Enter] key.
- Edit and print the label.
![](/g/b/img/faqend/faqp00100525_000/gb/en/2389352/back_to_top.gif)
PT-D800W, PT-E550W, PT-P900W/P900Wc, PT-P950NW
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.