TJ-4520TN
FAQs & Troubleshooting |
TJ-4520TN
Date: 14/10/2020 ID: faqp00100481_002
The left or right side of the label is not printed correctly.
The label size setting may be wrong.
Check the label size setting as follows:
- Connect your computer and the printer, and then make sure that the printer is turned on.
- Start the BPM (Brother Printer Management Tool), and then click the Printer Configuration button.
- Check the Paper Width/Paper Height settings in the FBPL tab.
The Print Head tension may be wrong.
Check the Print Head tension settings as follows:
- Adjust the Print Head tension using the Print Head Tension Adjustment Knob.
-
Choose one of five levels of tension adjustment depending on the media width you use.
For a label width less than 50.8 mm (2"), set the Print Head Tension Position Adjustment Slider as close to the label edge as possible to prevent unnecessary friction between the Print Head and the Platen Roller.
1. Print Head Tension Position Adjustment Slider
2. Default Setting
3. Print Head Tension Adjustment Knob
TJ-4420TN, TJ-4422TN, TJ-4520TN, TJ-4522TN
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.