PJ-763MFi
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/pj763mfieuk.jpg)
PJ-763MFi
Date: 02/03/2016 ID: faqp00100241_000
When printing using the optional roll printer case (PA-RC-001), gaps between lines may decrease or blurred characters may be printed.
These issues can occur under the following conditions:
- When using the optional roll printer case (PA-RC-001).
- When the Density Adjustment setting in the printer driver is set to 10 (maximum), or the Print Density setting in the Printer Setting Tool is set to 10 (maximum).
- If the printer becomes too hot after continuous printing.
To resolve the issue, update to the latest firmware version. Download and install the latest firmware version from the [Downloads] section.
PJ-722, PJ-723, PJ-762, PJ-763, PJ-763MFi, PJ-773
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.