FAQs & Troubleshooting

Close

QL-710W

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 04/02/2019 ID: faqp00001538_001

How do I switch to and use the mass storage mode?

The mass storage feature allows you to execute commands by sending data from a computer to the printer via USB. Files that have been copied to the printer's mass storage area are processed when you press the Wi-Fi button.

 

  1. Confirm that the printer is turned off.
     
  2. While holding down the Wi-Fi button, press and hold the power button.
    When the Status and Wi-Fi lamps start to flash in green, release the Wi-Fi and power button.
     
  3. Connect the computer to the printer via USB. The printer's mass storage area is displayed on the computer screen.
     
  4. Drag and drop the file you want to copy to the mass storage area.

    This feature supports ".bin" and ".blf" files. Do not use other file formats with this feature.

     
  5. Press the Wi-Fi button. The command file is executed.
     
  6. While the file is being executed, the Wi-Fi lamp lights in green.
     
  7. After the file has been executed, the Wi-Fi lamp turns off.
     
  8. To turn mass storage mode off, turn the printer off.
    The printer will start up in its normal operating mode.

Related Models

QL-710W, QL-720NW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.