PT-1000
 |
FAQs & Troubleshooting |
PT-1000
Date: 04/01/2018 ID: faqp00001503_000
The top and base layers of the laminated tape are misaligned.
Make sure the underside of the tape cassette is completely touching the base of the compartment.
If the tape is not installed correctly, the top and base layers of the laminated tape become misaligned, as shown in the picture below.
This can be corrected by feeding. Please follow the steps below.
- Reinstall the tape cassette and make sure it is completely touching the base of the compartment.
- Keep feeding by pressing the button for ejecting the tape until the top and base layers of laminated tape becomes aligned correctly.
GL100, GL-200, PT-1000, PT-1005, PT-1010, PT-1080, PT-1090, PT-1230PC, PT-1260, PT-1280, PT-1290, PT-1830, PT-18R, PT-1950, PT-2030, PT-2100, PT-2420PC, PT-2430PC, PT-2450DX, PT-2460, PT-2470, PT-2480, PT-2500PC, PT-2700, PT-2730, PT-3600, PT-550, PT-7100, PT-7500, PT-7600, PT-900, PT-9200DX, PT-9200PC, PT-9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN, PT-D400, PT-D450, PT-D600, PT-D800W, PT-E300, PT-E550W, PT-H300, PT-H500, PT-H75, PT-P300BT, PT-P700, PT-P710BT, PT-P750W, PT-P900W/P900Wc, PT-P950NW, RL-700S
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.