PJ-673
FAQs & Troubleshooting |
PJ-673
Date: 17/09/2014 ID: faqp00001491_004
How to charge the rechargeable Ni-MH Battery.
Perform the following procedure to charge the rechargeable Ni-MH battery.
- Charge the rechargeable Ni-MH battery immediately after purchase using the following procedure.
- Up to 120 minutes is needed to fully charge a rechargeable Ni-MH battery. About 70 pages can be printed when using a new, fully-charged rechargeable;Ni-MH battery.
-
Install the rechargeable Ni-MH battery into the printer.
-
Use the AC adapter and AC power cord to connect the printer to an AC power outlet, or use the DC cable to connect the printer to a DC power outlet.
-
Make sure that the printer is turned off.
-
Press and hold the Power button for a few seconds until the POWER indicator begins to blink in green.
- Depending on the settings specified in PJ-673 Utility, charging of the rechargeable Ni-MH battery may begin after the battery is refreshed.
- While the POWER indicator is blinking in green and orange, the power remaining in the rechargeable battery is being discharged and the battery is being refreshed.
- If there is still a considerable amount of charge in the rechargeable Ni-MH battery, it may not be refreshed.
- While the rechargeable Ni-MH battery is being refreshed, press and hold the Power button to stop refreshing the battery and begin charging it.
-
After the rechargeable Ni-MH battery has been refreshed, charging begins automatically.
The POWER indicator blinks in green until charging is complete.
When charging is complete, the POWER indicator turns off.
Stopping Rechargeable Ni-MH Battery Charging
To stop rechargeable Ni-MH battery from charging, press the Power button quickly two times.
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.