PJ-622
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/pj622euk.jpg)
PJ-622
Date: 12/11/2013 ID: faqp00001469_002
How to install the rechargeable Li-ion Battery (Optional)
- Open the battery cover by pressing the cover latch.
1. Battery cover
2. Cover latch
- Swing the cover open and remove it.
- Move the slide switches on the rechargeable Li-ion battery inward, and then insert the battery into the battery compartment.
3. Slide switches
When installing the rechargeable Li-ion battery, insert the battery removal ribbon into the battery compartment, and then install the battery. The battery removal ribbon is not needed when removing the rechargeable Li-ion battery.
- Move the slide switches outward to lock the battery in place.
- The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate depending on the voltage.
- When the rechargeable Li-ion battery is being used, the battery cover will not be needed. Keep it in a safe place so that it will not be lost.
- The voltage supplied by the rechargeable Li-ion battery fluctuates. The printing speed may also fluctuate depending on the voltage.
Removing the Rechargeable Li-ion Battery
Move the slide switches on the rechargeable Li-ion battery inward, and then remove the battery from the printer.
![]() |
1. Slide switches |
Related FAQs
PJ-622, PJ-623, PJ-662, PJ-663, PJ-673
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.