QL-710W
 |
FAQs & Troubleshooting |
QL-710W
Date: 21/08/2024 ID: faqp00001444_003
How do I reset network setting?
-
To reset network setting and turn APIPA ON
- Press and hold the Cut button while holding down the ON/OFF button when the machine is turned off.
- The Wi-Fi lamp starts flashing and the Status lamp lights orange.
- Press the Cut button twice while continuing to hold down the ON/OFF button.
-
To reset network setting and turn APIPA OFF
- Press and hold the Cut button while holding down the ON/OFF button when the machine is turned off.
- The Wi-Fi lamp starts flashing and the Status lamp lights orange.
- Press the Cut button 4 times while continuing to hold down the ON/OFF button.
APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
QL-710W, QL-720NW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.